Home Made Cold Cream

I made a batch of home made cold cream yesterday, and discovered quite by chance how to get a fluffy, creamy result. When I made cold cream previously I used the instructions and recipe from The Vintage Style Files, and the cold cream was nice, but the consistency of it was more like a slightly grainy body butter than cold cream. The instructions says to beat the cream until it goes white, glossy and slightly thick, but when I use the stick blender it gets like this almost immediately. I would usually spend some 10 minutes at it with the stick blender, which gives the consistency I described above.

For some time now I have wondered how it would turn out if I beat it for a couple of minutes only, and yesterday I decided to give it a go. I used the blender for a few minutes and then poured the cream into containers. This was a very bad idea. I ended up with  the wax and oil slightly congealed, whereas the rose water had separated. I then decided to try mixing it all together again using the stick blender and see if this would help, and boy did it! Have a look:

The picture might be a little bright, but hopefully you'll see how light and creamy it got. I then tested with an older batch to see if I could get it to be like this even though it was made a week ago, and it turned out just as well. It feels similar to Pond's, albeit a little richer. It's smooth, silky and wonderfully creamy, and I'm just so proud :D

Perfumes and Pliers

Today I thought I'd share a little tutorial on how to decant designer perfumes into vintage splash bottles. I own quite a few perfumes, some of them more than a decade old. These old perfumes are by no means spoiled, but they have grown quite powerful, and using an atomizer is out of the question as it dispenses too much scent. So I've bought vintage splash perfume bottles which I've cleaned and filled with the designer perfumes.

To do this you'll need the following: A clean splash perfume bottle, the perfume you wish to decant, a set of cutting pliers, a funnel and latex gloves.

Most modern perfume bottles have a collar around the neck of the perfume bottles which serves as a rest for the topper, and hides the seal. You'll need a sharp cutter to remove it. I like the one in the picture. It cuts though metal like a knife though butter, the tips are slim and get into tight spots, and it's very solid, so I can use it to bend the metal as I go. Once the collar is off I gently bend the bottom part of the seal away from the bottle. Once it's loosened it looks like this:

Lift the seal off the bottle, place the funnel in the splash perfume bottle, and pour slowly.

I'd recommend doing this bit over the sink. Keep the tap running, this way if you spill perfume (and I almost always do) it's less likely your kitchen will smell like a tarts boudoir afterwards.

Now you can use as little or much perfume as you wish; no more trying to aim the atomiser spray to hit the very edge of your arm in an attempt to get just the right amount :)

Boning the Bra

After having tested the bra and worn it for a day I noticed tension pains in the left trapezius muscle (from the neck down towards the shoulder), and I think the weight of the bra is the culprit. I have therefore decided to bone the cups and see if this helps. I have looked at boned bras from the era, and they have bones at the sides of the cups, as well as two bones in a reversed v placed in the cup, like this one from Etsy:

I'm still not sure what kind of boning would be best. I'm leaning towards spiral boning, as plastic tends to loose its shape. I still have a few coils of spiral boning left from my corset making days, as well as artificial whalebone, and I think I'll probably try the whalebone first, as it's easier to change if it doesn't work. Spiral boning is a pain to remove. Has anyone else tried this? What did you use, and did it work well?

Update November 14th:
I ended up using artificial whalebone (sturdy plastic), and it worked very well. I lined the bottom of the bra front with a velvet ribbon to protect the skin from poking. This is rather important as the bone ends will dig in pretty bed without the velvet ribbon.

1940's bra

I finished the 1940's bra late last night. I was unsure of how to get the balance right between sturdy cups and band, and comfort, and after having done a bit of research found that using elastic at the back, between the closure and the band seems to have been rather common, and one would have to assume that it worked well. So yesterday I went shopping for elastic and bra closure. I found both, but the first bra closure I found was both expensive and unattractive. I then found a 3 pack of bra extenders, which is easy enough to convert to a closure. But in black, white and nude. I don't wear white and nude, so I decided to make the closure myself, using scraps of the cotton satin I used for the bra. If anyone is interested in knowing how I put the closure together please leave a comment, and I will do a quick tutorial.

I used black cotton satin for the outer shell, a corset twill for lining, the straps are non elastic, and made of the cotton satin. I also placed the straps towards the front of the bra, not angling towards the back, apparently this should help keep the straps on the shoulders. And what I found when trying the bra on, is that it seems to be kinder to the shoulders. Somehow the weight carried by the straps gets distributed to the back of the shoulders. Also it will not pull the back of the bra upwards, as sometimes happens when the straps are placed towards the back.

Lo and behold, my first ever home made bra:

Beach Bra Frustrations

It seems no matter how I tweak the pattern I cannot seem to get it right. It gets baggy at the sides where the fabric is gathered, and although it holds the bust it cannot be said to be flattering. I am trying to find a way to get the back to carry the weight of the bust, but alas, no luck. I think I'll have to give the beach bra pattern a rest and come back to it later. For now I'll see if I can turn the bra pattern from the sew along into a beach bra. I think I have some iron on interfacing I can use to stiffen the cups in the stash, and I am thinking perhaps a shirred back panel. It should keep the bra in place and hopefully also look good.

Beach Bra and Knickers

Sorry about the long silence, guys. Now I'm back and I'll try to blog on a more regular basis.

At the moment I am working on a beach bra I bought from PamoolaVintage. The pattern is quite straightforward, and it was easy enough to enlarge to fit my 40-inch bust. Unfortunately the fitting was not quite as easy. I have made 2 mock ups already, and I believe I will have to make one more. The pattern calls for one dart. For a 32G UK sizing bust, this will just not do. So I have added 2 more. I also found that cutting it on the bias might work for small busted ladies who doesn't need much support, but as I do, I cut the second mock up on the straight of the grain. In the next mock up I will add a curve at the centre front. A bra pattern I'm also working on from Mrs Depew has a curved centre front, and it fits very well (Please check out her sew along, it's full of useful information on lingerie sewing).

Here's a picture of the beach bra:

Once I've finished the (hopefully) final mock up of this beauty, I will start working on the matching knickers. The pattern for the knickers weren't supplied, so I'll have to wing it. I think the knickers will be easier than the bra though, as I can adapt a pattern I made for a 1930's-40's style pair of trousers for them.

Cold Cream Musings

In January this year I discovered the advantages of cold cream, and since then I have been using it religiously. It really does wonders for the complexion, and if I had known the results I would have started years ago. I have spent time browsing the net reading about other peoples experiences using cold cream, and I have noticed that many have been introduced to it by elder relatives. In my family the only one from the older generation (as in grandmas generation) I can remember ever having used skin care products was my great aunt Gudrun, and she used Nivea. I am not sure if she used it as a cleanser or just as a moisturiser, but I understand it was made for both purposes.

Up until now I have been using Pond's cold cream as cleanser, followed by Nivea, and a cotton pad with rose water to remove the stickiness. This has worked really well, but I don't like having to order the cold cream online (for some reason Pond's are not available in Norway), so I have decided to try out Astral Cream instead. What I do is I clean my hands well, apply the cream, and give myself a facial massage. This makes the cream melt, and it feels like a heavy oil. I then remove the oil with rose water and cotton wool. So far it seems to work even better then the old regime. It leaves the skin glowing but not oily or greasy in any way, and the skin tone gets evened out better.